When a floor crew is running daily concrete prep, two problems show up fast:
1. Slow cut at the start, and
2. Random scratch patterns that waste time later.
A simple way to fix both is to standardize a pad workflow that starts aggressive enough to level fast, then steps through the grits without “jumping” too much.
A proven 4-inch pad workflow (50# → 800#)
Here’s a practical sequence many contractors use for consistent results:
• Step 1 — 50# for fast leveling and coating prep
Use 50# pads to remove laitance, open the surface, and level minor edges.
This step is where speed matters most, so pad quality and sharpness are critical.
• Step 2 — 100# / 200# to remove deep scratches
After 50#, the goal is not shine—it’s scratch control.
Moving to 100# and 200# makes the floor easier to finish and reduces rework.
• Step 3 — 400# / 800# to refine and prep for the next system
These grits help you get a clean, uniform surface for densifier, coatings, or polishing steps.
The floor looks more even, and your later stages become predictable.
Why bulk purchasing matters for jobsite consistency
Bulk pad orders are not only about price. They are about:
• Same batch consistency (less variation from box to box)
• Fewer emergency purchases (no downtime when a crew runs out)
• Repeatable performance (the same workflow on every project)
Private label (logo) pads for distributors and flooring brands
If you’re building your own brand, private label pads can help you:
• Keep the product line consistent
• Make your packaging and on-site tools look professional
• Build long-term customer recognition
Key buying checklist (before you reorder)
To avoid mismatch and delays, confirm these details every time:
• Pad diameter (e.g., 4-inch)
• Grit list and quantity per grit
• Concrete condition (soft/medium/hard)
• Whether you need private label/logo
If you want, you can share your machine type and job goal (prep for coating, scratch removal, or polishing), and we’ll recommend a pad combination that matches your workflow.