When a rental company from Moldova contacted us about diamond shoes for an HTC GL270 grinding machine, the situation looked simple:
They ordered:
• 6 pcs diamond grinding shoes
• Grit 6
• Hard bond
• Application: correcting errors on hard concrete floors
But during technical discussion, an important question came up:
Is Hard bond really the best choice for hard concrete?
This is a very common misunderstanding in the concrete grinding industry.
⸻
Understanding Bond Logic: Hard Concrete vs Hard Bond
Many contractors assume:
Hard concrete → Hard bond tools
But technically, this is not correct.
Here’s why:
• Hard concrete does not wear down diamond tools easily.
• If the bond is also hard, diamonds cannot release properly.
• This leads to glazing, slow cutting speed, and overheating.
In most cases:
Hard concrete requires Soft bond tools.
Soft bond allows diamonds to expose faster, keeping cutting performance stable.
Hard bond is typically used on softer concrete surfaces.
⸻
Why This Matters for Rental Companies
In this real case, the customer operates an equipment rental business.
Rental companies face a different challenge:
• Their end-users are not always professional grinders.
• Tools must be forgiving.
• Cutting performance must be stable.
• Tool failure leads to complaints and machine returns.
For rental applications, choosing the correct bond type is even more critical.
If tools glaze or stop cutting, renters assume the machine is faulty.
That damages the rental company’s reputation.
⸻
Recommended Grinding Workflow for HTC GL270
For correcting surface irregularities on hard concrete, we typically suggest:
1. Soft bond 16# or 30# – aggressive leveling
2. Medium bond 60# – scratch control
3. Hybrid 50# or 100# – transition stage
4. Resin pads 100–800 – finishing
This workflow reduces tool change frequency and ensures smoother transitions between metal and resin stages.
⸻
Real-World Testing Is Smart
In this case, the customer mentioned they wanted to test whether our consumables fit their HTC GL270 machines.
This is a smart approach.
Before switching suppliers, professional rental companies always verify:
• Fitment
• Wear rate
• Cutting efficiency
• Customer feedback
We support this process by advising on bond selection before production begins.
Because correct bond selection saves time, money, and customer complaints.
⸻
Key Takeaway
If you are grinding very hard or dense concrete:
Soft bond often performs better than hard bond.
Bond selection directly affects:
• Cutting speed
• Tool life
• Heat generation
• End-user satisfaction
Choosing the right bond is more important than choosing the lowest price.
⸻
Looking for HTC-Compatible Grinding Tools?
We manufacture:
• HTC-compatible metal bond diamond shoes
• Hybrid diamond pads
• Resin polishing pads
• PCD tools for coating removal
If you operate:
• A rental business
• A floor preparation company
• A coating installation team
We can recommend a complete grinding system based on your concrete condition.
Tell us:
• Machine model
• Concrete hardness
• Application goal
And we will suggest a structured grinding setup.
⸻
Final Thoughts
In concrete grinding, the wrong bond can cost more than the wrong grit.
Technical guidance before ordering prevents production delays, tool glazing, and rental complaints.
Understanding bond logic is not just technical knowledge.
It is a competitive advantage.