Choosing concrete polishing pads involves more than selecting a grit. Buyers also need to consider pad diameter, working area, floor condition, polishing stage, and the machine’s holder or adapter setup.
A customer in the United States recently ordered several concrete polishing pad formats from Monkey King Diamond Tools. The order record listed an HTC 500 as the machine reference.
After receiving the order, the customer sent us this direct feedback:
“The pads work great.”
Which Concrete Polishing Pads Did the Customer Order?
The order combined three different pad formats for open floor areas, smaller controlled areas, edges, and corners.
1. 9-Inch Fiber Polishing Pads for Concrete
The customer ordered 9-inch fiber pads in 50 grit and 200 grit.
Our 9-inch fiber polishing pads for concrete are available in multiple diameters and grits for concrete floor polishing and scratch refinement.
The larger working diameter helps cover more floor area than small hand-polishing pads. Buyers can select the diameter and grit according to their machine setup, previous grinding step, and required finish.
2. 5-Inch Dry Polishing Pads for Concrete
The same order included 5-inch pads in 50, 100, and 200 grit.
These 5-inch dry polishing pads for concrete provide a smaller working diameter for controlled polishing, edge work, scratch refinement, and finish improvement.
The customer selected three grits:
- 50 grit for the more aggressive initial refinement stage
- 100 grit for refining scratches left by the previous step
- 200 grit for continuing the surface refinement process
The correct starting grit depends on the floor condition and the scratches remaining from the previous grinding or polishing stage.
3. Triangle Dry Polishing Pad for Corners and Edges
Round polishing pads cannot reach every corner.
The order therefore included a 50-grit triangle pad for restricted areas. Our triangle dry polishing pad for concrete and terrazzo is designed for corners, edges, and tight sections where circular pads may leave an unfinished area.
The delta shape allows the pad to work closer to walls and into corners during dry concrete polishing.
Why Combine Different Polishing Pad Shapes?
One polishing pad format cannot efficiently cover every part of a concrete floor.
- A larger fiber pad helps cover open floor areas.
- A 5-inch pad provides more control in smaller areas.
- A triangle pad reaches corners and restricted sections.
- Multiple grits support progressive scratch refinement.
This combination gives the buyer separate tooling options for the main floor, perimeter, edges, and corners.
Important HTC 500 Fitment Note
The order record referenced an HTC 500, but the machine model alone does not confirm direct pad fitment.
Before ordering concrete polishing pads for an HTC 500 or another floor grinder, confirm:
- Pad or holder diameter
- Hook-and-loop or other backing interface
- Drive plate configuration
- Required adapter
- Dry or wet polishing process
- Starting floor condition
- Required final finish
If you are unsure, send us clear photos of the machine plate and holder before ordering.
How to Select Concrete Polishing Pads
Before choosing a pad, answer these questions:
- What machine and holder are being used?
- Is the work on an open floor, edge, or corner?
- What scratches remain from the previous step?
- Which grit should begin the refinement process?
- Is the job using a dry or wet polishing workflow?
- What final finish is required?
These details help prevent ordering the correct pad material in the wrong size, grit, or mounting configuration.
Need Help Choosing Pads for Your Concrete Floor Grinder?
Monkey King Diamond Tools supplies concrete grinding, transition, and polishing tools for contractors and distributors.
Send us your machine model, holder photos, required diameter, floor condition, grit sequence, and quantity. We can help check the tooling setup before you order.