Overview

This 12mm thick resin diamond polishing pad is designed for concrete and terrazzo floor polishing, scratch refinement, and step-by-step shine development. The thicker resin bond body supports longer polishing life than thinner finishing pads and is suitable for regular floor polishing workflows after grinding and surface preparation.

Choose the diameter and grit according to the machine holder, floor condition, previous scratch pattern, and target finish. Available grit options include 50, 100, 200, 400, 800, 1500, and 3000.

For broader polishing pad selection, browse resin polishing pads.

Best for

• Concrete floor polishing
• Terrazzo floor polishing
• Scratch refinement after grinding
• Step-by-step gloss development
• Floor restoration and maintenance polishing
• Jobs that need longer pad life than thin resin pads

Features

• 12mm thick resin bond polishing pad
• Designed for concrete and terrazzo floor polishing
• Available in 3" and 4" diameter options
• Available grits: 50, 100, 200, 400, 800, 1500, and 3000
• Suitable for staged polishing from lower grit refinement to higher grit finish
• Helps improve clarity and surface consistency before final polishing

How to Use

Use this pad after coating removal, metal grinding, or hybrid refinement has prepared the concrete surface for polishing.

Start with the grit that matches the current scratch pattern. Do not jump directly to a high grit if deep scratches from earlier grinding stages are still visible.

Progress step by step through finer grits until the required clarity and gloss are achieved. Keep the pad moving evenly and inspect the floor between grit changes.

For visible metal scratches before resin polishing, use hybrid pads before moving into higher resin grits.

Polishing Workflow

If the floor still has epoxy, glue, paint, mastic, or coating residue, start with PCD coating removal tools before polishing.

For concrete that still needs slab opening, leveling, or scratch control, use metal bond grinding tools before resin polishing.

After the grinding scratches are refined, continue with resin polishing pads to build the final finish.

If you are not sure about machine fitment, check Shop by Machine, review adapters and plates, or send your machine model and pad holder photo through Contact Us.

FAQ

What is this 12mm resin polishing pad mainly used for?
It is used for concrete and terrazzo floor polishing, scratch refinement, and step-by-step gloss development.

Which grit should I start with?
Start with the grit that matches the current scratch depth and the previous grinding step. Lower grits are used for stronger refinement, while higher grits are used for finish improvement.

Is this pad for coating removal?
No. This is a resin polishing pad. If the floor still has coating residue, use PCD coating removal tools first.

What comes before this pad?
For heavy floor preparation, use metal bond grinding tools. If visible scratches remain before polishing, use hybrid pads.

Does it fit every floor machine?
No. Fitment depends on pad diameter, holder type, machine setup, and required quantity. Confirm these details before ordering.

What should I send before ordering?
Send the machine brand and model, pad diameter, current floor condition, previous grit step, target finish, and required quantity.