
- …
- …
Hybrid & Transitional Diamond Pads for Concrete Floor Polishing
Refine metal-bond grinding marks before resin polishing. Compare copper, hybrid and ceramic transitional pads for concrete floors, with size and grit options for floor grinding and edge work.
How to Choose Hybrid Transition Pads
Hybrid transitional pads work between metal bond grinding tools and resin polishing pads. They refine the scratch pattern left by metal tools and prepare the surface for finer polishing stages.
Choose hybrid pads when the necessary grinding work is complete but the remaining marks need a suitable transition before resin polishing. The aim is a more uniform, refined scratch pattern—not simply a shinier surface over the same scratches.
Deep isolated gouges or uneven grinding may need correction at an earlier stage. For a fuller explanation of the process, read our transitional pad guide.
Copper, Hybrid & Ceramic Transitional Pads
Copper-bond transition pads
For a dry-use copper option, compare the listed 3 Inch Copper-Bond Transition Pad. Select the grit for the remaining grinding marks and the next stage of your process.Hybrid transition pads
These provide a dedicated scratch-refinement step between metal grinding and resin polishing. Compare the individual product’s application, available grits and working method.Ceramic transitional pads
Compare ceramic options for the specified concrete and machine application. The listed 4 Inch Ceramic Transitional Grinding Pad offers 30, 50, 100, 200 and 400 grit options and is labeled for dry or wet use.Choose by the specific product rather than assuming that copper always cuts faster or ceramic always leaves a finer finish. Pad formulation, grit and floor condition all affect the result.
If an existing coating needs removal, compare suitable PCD coating removal tools first. Inspect the exposed concrete before selecting the grinding and transition stages it needs.
When the Floor Is Ready for Resin Pads
Clean and inspect the floor after the transition step. The earlier grinding marks should be adequately refined into a more uniform scratch pattern, without isolated deep cuts that the next pad cannot reasonably correct.
Continue with resin polishing pads when the surface is ready for the selected resin sequence. Check the result between stages rather than progressing by grit number alone.
For machine-specific options, browse shop by machine. If you would like help comparing pads or holders, contact us.
Shop Hybrid & Transitional Pads
Frequently Asked Questions
What are transitional pads used for in concrete polishing?
Transitional pads refine grinding marks between metal bond grinding tools and resin polishing pads.
They help establish a more uniform scratch pattern before finer polishing. They are a transition tool, rather than a replacement for every grinding or finishing stage.
When should I use hybrid pads instead of resin pads?
Use suitable hybrid pads when the main grinding work is complete but the remaining marks need further refinement before resin polishing.
Choose a starting grade that adequately refines those marks in a test area. Deep gouges or uneven grinding may require earlier correction rather than a finer polishing pad.
What is the difference between copper hybrid pads and ceramic hybrid pads?
They use different formulations, and their applications can overlap. Compare the specific product’s intended floor condition, grit options, size and wet or dry method.
Neither the material name nor the grit number alone establishes which pad will cut more aggressively or leave the finer scratch pattern.
Can hybrid pads remove epoxy, glue, or coating?
Do not choose a transition pad as the default tool for removing an existing coating. Its main role here is scratch refinement before resin polishing.
Compare suitable PCD coating removal tools according to the coating condition. After removal, inspect the concrete and select the preparation stages it needs.
How do I choose the right hybrid pad for my grinder?
Select the diameter, backing or mounting connection and working method specified for your machine setup. Floor-grinder pads, machine-specific tooling and threaded edge tools use different arrangements.
Browse shop by machine for the relevant system, or contact us if you would like help comparing options.
Can transitional pads be used wet or dry?
Use the method stated for the selected product. Some transition pads are dry-use only, while others are offered for wet or dry work.
For example, the copper-bond pad listed as Dry Use and the 4 inch ceramic pad listed as Dry/Wet have different working-method descriptions. Follow the selected pad and machine instructions.
Not Sure Which Hybrid Pad or Holder You Need?
We can help you compare copper, hybrid and ceramic pads, grit options and holder types for your next transition step.
Contact
sales@monkeykingdiamond.com
Shanghai, China
Follow us on Social Media
Linkedin Youtube Facebook Instagram Tiktok
© Shanghai Suxian Industry & Trade Co., Ltd. All rights reserved. Terms & Conditions Privacy Policy


















