this listing is for a special order

36 of each GRIT， 50 100 200 400， total 144pcs.

shipping cost and tax included, to buyer's door price

and with 9 pcs 3 inch concrete pad as  free sample 

Overview

The MONKEY KING 3 Inch Hybrid Transition Pad is designed for scratch refinement between metal bond grinding and resin polishing on concrete floors.

Use this 3-inch hybrid pad after the metal grinding stage has produced an even scratch pattern but the remaining scratches are still too visible for resin pads.

Its role is to refine the surface progressively and reduce scratch carry-over into the resin polishing stages. It is not intended to replace aggressive metal grinding or coating removal tools.

For a complete workflow, begin with the correct Metal Bond Grinding Tools, use this hybrid transition pad for scratch refinement, and then continue with matching Resin Polishing Pads.

Best For

• Refining controlled metal bond scratches on concrete floors

• Transitioning from metal grinding into resin polishing

• Reducing visible scratch carry-over before higher polishing stages

• Improving surface consistency across a multi-step polishing sequence

• Professional concrete polishing and floor restoration workflows

• Contractors and distributors requiring a universal 3-inch hybrid pad option

Key Features

• 3-inch hybrid transition pad for concrete floor polishing

• Designed for use between metal bond and resin polishing stages

• Helps refine the scratch pattern left by previous grinding steps

• Seven available grit options from 50 to 3000

• Separate grit selection for different refinement and finishing stages

• Compact 3-inch format for compatible pad holders and driver plates

• Suitable for step-by-step scratch refinement when the holder connection matches

Available Grits

50 Grit

The coarsest option in this series. Select it when the previous grinding step has left a controlled but still visible scratch pattern that requires stronger refinement.

100 Grit

Used for early transitional refinement after the previous grinding stage when the floor is ready to move away from metal bond tooling.

200 Grit

Used to continue reducing scratches and prepare the surface for finer transitional or polishing steps.

400 Grit

A middle-to-fine refinement option for improving surface uniformity before higher grit polishing.

800 Grit

Used when the floor has already passed the coarse scratch-removal stages and requires finer surface refinement.

1500 Grit

A fine-stage option for progressing the surface toward a more refined appearance when the previous grit has finished evenly.

3000 Grit

The finest grit offered in this product series. Use only after the previous stages have produced an even, controlled surface.

How to Select the Starting Grit

Do not select a hybrid pad only by matching the number used in the previous metal step.

Check:

• Previous metal bond grit

• Depth and uniformity of the remaining scratches

• Concrete hardness

• Machine weight and working pressure

• Floor openness and aggregate exposure

• Target finish

If the metal scratches are still deep, uneven or random, remain with the appropriate metal grinding step.

Move to a hybrid transition pad only after the metal scratch pattern is controlled but still needs refinement before resin polishing.

Visit Hybrid Transition Pads for more information about choosing the correct transition stage.

When Not to Use This Pad

Do not use this hybrid pad as the first tool on a floor that still has epoxy, glue, mastic, paint or another coating.

Remove the coating first with an appropriate PCD tool, then use metal bond grinding tools to open and level the exposed concrete.

Do not jump directly to high grit hybrid pads while deep metal scratches remain. Higher grits may pass over the scratches instead of removing them.

Fitment Note

This is a 3-inch pad, but diameter alone does not confirm compatibility.

Before ordering, confirm:

• Pad holder diameter

• Holder face and attachment system

• Grinder brand and model

• Number of pads required per machine

• Previous grinding step

• Required starting grit

• Intended operating method

If the holder or machine setup is uncertain, send us the grinder model, holder photo and current tooling information before ordering.

How to Use

1. Inspect the floor.

Confirm that coating removal and metal grinding have been completed and that no deep random scratches remain.

2. Choose the starting grit.

Select the hybrid grit according to the previous metal step, scratch depth and concrete condition.

3. Confirm the holder.

Make sure the pad diameter and attachment match the machine’s pad holder or driver plate.

4. Install matching pads.

Install the correct number of pads evenly across the machine plate.

5. Refine the scratch pattern.

Run the machine according to its operating instructions and check whether the previous scratches are being removed evenly.

6. Inspect between steps.

Clean the floor and check the scratch pattern before moving to the next grit.

7. Continue progressively.

Do not skip grit stages unless a test area confirms that the next grit can remove the previous scratch pattern completely.

8. Move to resin polishing.

Continue with resin polishing only after the hybrid stage has produced an even surface without deep metal scratch carry-over.

Always follow the grinder and tooling manufacturers’ operating and safety instructions.

Buyer Checklist

Before ordering, provide:

• Grinder brand and model

• Pad holder photo

• Required pad diameter

• Number of pads per machine

• Previous metal grit

• Current scratch condition

• Required hybrid grit

• Target finish

Frequently Asked Questions

What is a hybrid transition pad used for?

It is used between metal bond grinding and resin polishing to reduce the remaining metal scratch pattern and prepare the floor for finer polishing stages.

Can this pad remove epoxy, glue or coating?

No. Use an appropriate PCD coating-removal tool before metal grinding and hybrid refinement.

Can I start directly with resin polishing pads?

Only when the metal scratch pattern has already been refined sufficiently. Starting resin polishing too early can leave visible scratches underneath the polished surface.

Which grit should I start with?

The starting grit depends on the previous metal step, scratch depth, concrete hardness and target finish. Do not select by grit number alone.

Does it fit every floor grinder?

No. Confirm the 3-inch diameter, holder connection, machine model and number of pads required per plate.

Can I skip hybrid grit steps?

Only after testing confirms that the next grit removes the previous scratch pattern completely. Skipping too far can leave visible scratches or inconsistent results.

What should I send if I am unsure?

Send the grinder model, holder photo, previous metal grit, current floor condition and target finish.

Need Help Choosing the Correct Grit?

Contact Monkey King Diamond Tools and send us your machine model, holder photo, previous grinding step and current scratch condition.

We will help check the required hybrid pad setup before you order.