This 2-tooth reusable PCD coating removal tool is designed for Husqvarna floor grinders and for contractors who want fast coating removal with lower long-term tooling cost. The tool body can be reused, and after wear, you only replace the PCD segments instead of replacing the full tool.

It is suitable for fast removal of epoxy coatings, polyurethane coatings, carpet glue, and asphalt-based adhesive residues on concrete floors. For contractors doing repeated floor preparation work with Husqvarna machines, this structure is more practical because it combines aggressive coating removal with a reusable body system.

What makes this 2-tooth Husqvarna PCD tool different

The main feature is the reusable tool body with replaceable PCD segments. That means the holder remains in service, while only the worn PCD segments need to be replaced later. This helps reduce waste and lowers long-term consumable cost.

The PCD segments are made from high-quality material with long service life and good impact resistance. The segments are screw-fixed, which allows angle adjustment and rotation during use. This helps keep the cutting edge working efficiently and allows better use of the full PCD segment before replacement.

The angled PCD design also improves cutting action against coating layers, helping the tool bite into epoxy, glue, and similar materials more effectively instead of only rubbing the surface.

Service life reference

For reference, the 2-tooth version has a service life of about 5000 square meters per 9 pieces. Actual life depends on coating type, floor hardness, machine setup, machine weight, and operator method.

How to use it more effectively

If the machine weight is below 200 kg, the 2-tooth version is the preferred option. This makes it more suitable for lighter Husqvarna grinding setups where a more controlled PCD structure works better.

If the coating is elastic or soft, do not add extra weight blocks. If the coating is harder, extra weight can improve cutting performance.

If the grinding speed becomes slower during use, loosen the screw and rotate the PCD segment about 30 degrees. This helps restore cutting efficiency. Each PCD segment can be rotated multiple times. After the usable edge is consumed, you replace only the PCD segment instead of the full tool body.

This product generally performs better on lighter machines and is not recommended for machines above 400 kg.

Best for

This 2-tooth version is best for contractors using Husqvarna floor grinders who want:
fast coating removal,
replaceable PCD segments,
lower long-term tooling cost,
and a reusable system for repeated floor preparation work.

FAQ

Q: What machines is this tool for?
A: This version is designed for Husqvarna floor grinders.

Q: What coatings is this tool suitable for?
A: It is suitable for fast removal of epoxy coatings, polyurethane coatings, carpet glue, and asphalt-based adhesive residues.

Q: What is the main advantage of the reusable design?
A: The tool body can be reused. After wear, you replace only the PCD segments, which lowers long-term tooling cost.

Q: When should I choose the 2-tooth version?
A: It is the better option for machines below 200 kg and for users who want a more controlled PCD setup on lighter grinders.

Q: Can the PCD segment be rotated?
A: Yes. The screw-fixed design allows angle adjustment and rotation, which helps recover cutting performance and improve segment usage.

Q: Is it suitable for very heavy machines?
A: It is generally not recommended for machines above 400 kg.