This 3-tooth reusable PCD coating removal tool is designed for Husqvarna floor grinders and for contractors who want longer service life with a reusable coating removal system. The tool body can be reused, and after wear, only the PCD segments need to be replaced.

It is suitable for fast removal of epoxy coatings, polyurethane coatings, carpet glue, and asphalt-based adhesive residues on concrete floors. For contractors handling repeated floor preparation work on Husqvarna machines, this design offers a more economical long-term solution than replacing the full tool body every time.

What makes this 3-tooth Husqvarna PCD tool different

The main feature is the reusable body combined with replaceable screw-fixed PCD segments. This helps reduce long-term consumable cost while keeping the cutting system practical for repeat jobs.

The PCD segments are made from high-quality material with long service life and good impact resistance. The screw-fixed structure allows angle adjustment and rotation during use. This helps keep the tool sharp and makes fuller use of the PCD segment before replacement.

The extra PCD point also gives the 3-tooth version a higher total service life reference than the 2-tooth version, making it a better choice where machine weight and coating condition support it.

Service life reference

For reference, the 3-tooth version has a service life of about 7000 square meters per 9 pieces. Actual life depends on coating type, floor hardness, machine setup, machine weight, and operator method. On harder floors, service life can be longer.

How to use it more effectively

If the machine weight is above 200 kg, the 3-tooth version is the preferred option. This makes it more suitable for heavier Husqvarna working conditions where the machine can support the extra cutting point effectively.

If the coating is elastic or soft, do not add extra weight blocks. If the coating is harder, added machine weight can improve cutting performance.

If the grinding speed becomes slower during use, loosen the screw and rotate the PCD segment about 30 degrees. This helps restore cutting efficiency. Each PCD segment can be rotated multiple times. After the usable edge is consumed, you replace only the PCD segment instead of the full tool body.

This product still performs best when machine weight and coating type are matched correctly, and it is generally not recommended for machines above 400 kg.

Best for

This 3-tooth version is best for contractors using Husqvarna floor grinders who want:
fast coating removal,
longer total service life,
replaceable PCD segments,
and lower long-term tooling cost in repeated floor preparation work.

FAQ

Q: What machines is this tool for?
A: This version is designed for Husqvarna floor grinders.

Q: What coatings is this tool suitable for?
A: It is suitable for fast removal of epoxy coatings, polyurethane coatings, carpet glue, and asphalt-based adhesive residues.

Q: What is the main advantage of the reusable design?
A: The body stays in service, and only the worn PCD segments need to be replaced later, which reduces long-term tooling cost.

Q: When should I choose the 3-tooth version?
A: It is the better option when machine weight is above 200 kg and the working condition can support a stronger multi-point PCD setup.

Q: Why is the service life reference higher than the 2-tooth version?
A: The 3-tooth version has a higher total service life reference because of its structure and added cutting point, but actual performance still depends on jobsite conditions.

Q: Can the PCD segment be rotated?
A: Yes. The screw-fixed design allows angle adjustment and rotation, which helps recover cutting efficiency and extend usable segment life.

Q: Is it suitable for machines above 400 kg?
A: It is generally not recommended for machines above 400 kg.