Overview

This metal bond diamond grinding tool is designed for selected Husqvarna floor grinders equipped with a compatible Redi Lock-style holder or grinding plate.

It is intended for concrete grinding, slab opening, surface preparation, and scratch control before finer grinding, hybrid transition, or resin polishing stages.

The actual cutting rate, scratch pattern, and suitable floor hardness depend on the selected grit, bond hardness, and segment configuration.

For more compatible grinding options, see our Husqvarna metal grinding tools.

Best For

• General concrete floor grinding
• Slab opening and surface preparation
• Controlled leveling with the appropriate grit and bond
• Scratch refinement during metal bond grinding
• Preparing concrete for hybrid transition or resin polishing
• Selected Husqvarna grinders with compatible Redi Lock-style holders

Features

• Metal bond diamond grinding design
• Redi Lock-style backing interface
• Intended for selected compatible Husqvarna floor-grinder holders
• Suitable for concrete grinding and floor preparation
• Supports slab opening, scratch control, and surface refinement
• Available performance depends on grit, bond, and segment configuration
• Designed for the metal grinding stage before transition or polishing
• Sold as a grinding tool—not as a PCD coating-removal tool

Fitment Note

This tool is not automatically compatible with every Husqvarna grinder or every current Husqvarna tooling system.

Before ordering, confirm:

• Machine manufacturer and model
• Grinding plate or holder type
• Tool-side locking interface
• Holder diameter
• Number of tools required
• Redi Lock-style profile and dimensions

Do not assume compatibility based only on the Husqvarna machine name.

If you are uncertain, send clear photos of the machine plate, current grinding tool, locking interface, and relevant measurements for fitment checking.

How to Use

• Install the tool only on a confirmed compatible holder or grinding plate.
• Use it during the metal bond grinding and surface-preparation stage.
• Select the grit and bond according to the concrete condition and required cutting rate.
• Use the appropriate configuration for slab opening, surface refinement, or scratch control.
• Inspect the floor after each grinding stage.
• Continue through finer metal grits until the current scratch pattern is controlled.
• Use hybrid transition tooling when metal bond scratches must be reduced before resin polishing.
• Move into resin polishing only after the earlier grinding and transition stages are complete.

After the metal bond stage, browse metal bond grinding tools for concrete grinding for related workflow options.

Application Scenarios

• Concrete floor opening before polishing
• General surface preparation
• Controlled floor leveling with the correct tool configuration
• Scratch reduction before transition tooling
• Commercial and industrial concrete floor grinding
• Selected Husqvarna-compatible grinding workflows

For broader tooling selection, shop high-performance PCD, metal bond, hybrid and resin diamond tools.

FAQ

What is this tool mainly used for?

It is used for concrete floor grinding and surface preparation. Depending on the selected grit, bond, and segment configuration, it can support slab opening, controlled leveling, and scratch refinement.

Is this a coating-removal tool or a grinding tool?

It should be positioned as a metal bond concrete grinding tool.

It is not a PCD coating-removal tool. PCD tooling is normally selected when the primary job is removing epoxy, glue, paint, mastic, or other thick coatings.

What machines does it fit?

It is designed for selected Husqvarna floor grinders equipped with a compatible Redi Lock-style holder or grinding plate.

Compatibility must be confirmed from the machine plate and holder interface. The Husqvarna machine name alone is not sufficient.

Does it fit the current Husqvarna EZchange system?

Compatibility cannot be assumed. Redi Lock-style and current EZchange configurations should not be treated as automatically interchangeable.

Confirm the exact holder profile, dimensions, and machine configuration before ordering.

How should I choose the grit and bond?

Choose the grit according to the required cutting depth and the scratches that must be removed.

Choose the bond according to the concrete condition and the expected tool wear. If the floor hardness is unknown, perform a test area before processing the full floor.

What comes after this tool?

First, continue through the required metal bond grits until the current scratch pattern is controlled.

If metal scratches remain visible, use hybrid transition tooling before moving into resin polishing. Do not jump directly to high-grit resin pads when earlier grinding scratches remain.

Do I need an adapter for another machine?

If the machine does not have a matching Redi Lock-style holder, a compatible adapter or replacement plate may be required.

Before selecting an adapter, confirm:

• Machine-side mounting pattern
• Bolt spacing and thread specification
• Plate diameter
• Tool quantity
• Tool-side Redi Lock-style interface

Browse our Husqvarna adapters, or send plate photos and measurements for fitment checking.