Metal Bond Diamond Grinding Disc for SASE Grinder | Single Bar / Single Bar with 2 Slots

Overview
This metal bond diamond grinding disc is designed for SASE grinder concrete floor preparation and grinding workflows. It is intended for buyers who need a practical SASE metal tool with standard segment choices for slab opening, leveling, scratch control, and post-coating-removal grinding.

This product sits in the metal bond grinding stage, not the PCD coating removal stage and not the final polishing stage. If the floor still has epoxy, glue, mastic, paint, or adhesive residue, start with PCD coating removal tools⁠ . Once the coating is removed and the slab is ready for grinding, metal bond tools are the next step before hybrid pads⁠ or resin polishing pads⁠ . This workflow matches both Monkey King’s site structure and how SASE tooling is commonly positioned by U.S. suppliers.  

Buyers can choose between single bar and single bar with 2 slots configurations, with grit options 6 / 16 / 30 / 60 / 120 and bond options soft / medium / hard. Extra soft bond and extra hard bond can be made on request. Because exact mounting details are not fully verified from the current evidence, buyers should confirm the machine model, holder / plate style, and current tool pattern before ordering.

Best For

• Concrete floor grinding after coating removal
• Slab opening and early grinding stages
• Surface leveling and scratch control
• General floor preparation on SASE grinder setups
• Buyers comparing single bar vs. single bar with 2 slots configurations
• Jobs that need grit and bond selection by floor condition

Features

• Metal bond diamond grinding tool for SASE grinder workflows
• Available in single bar and single bar with 2 slots options
• Grit options: 6 / 16 / 30 / 60 / 120
• Bond options: soft / medium / hard
• Extra soft bond and extra hard bond can be made on request
• Built for grinding and prep stages rather than coating removal or polishing

Fitment Note
Before ordering, confirm:

• your machine model
• your holder / plate style
• your mounting interface
• the segment option you want
• the grit and bond needed for your floor
• the required quantity per machine
• whether the job starts with coating removal or already-clean concrete

If you are not sure, please check Shop by Machine⁠ , review adapters and plates⁠ , or send photos through Contact Us⁠ . Because exact interface evidence is incomplete, confirm before ordering.

How to Use
If the slab still has epoxy, glue, mastic, paint, or adhesive residue, begin with PCD coating removal tools⁠ . After coating removal, switch to metal bond grinding tools⁠ for slab opening, leveling, and scratch control. Once the metal stage is complete, move to hybrid pads⁠ if transition refinement is needed, then continue to resin polishing pads⁠ for finish improvement and gloss development. If your machine requires a fitment change, review adapters and plates⁠ . This stage-based workflow matches the way Monkey King organizes tooling and the way U.S. suppliers describe concrete prep systems.

FAQ
1. What is this tool mainly used for?
It is mainly used for concrete grinding, slab opening, leveling, and surface preparation on SASE grinder workflows after coating removal.

2. Is it for coating removal, grinding, transition, or polishing?
It is for the grinding stage. If coatings are still on the floor, use PCD coating removal tools⁠ first.

3. Does it fit every machine?
No. Unable to verify. Confirm the grinder model, holder / plate style, and mounting interface before ordering. If needed, review Shop by Machine⁠ or adapters and plates⁠ .

4. What should I send before ordering?
Please send your machine model, tool holder / plate photo, current tool photo, required segment option, grit / bond request, and the job type.