Overview

Single-segment metal bond grinding shoes for Rhino floor grinders, designed for concrete floor grinding, surface preparation, leveling, and scratch removal.

The single-segment design gives a more aggressive cutting contact than wider multi-segment tools, making it useful when the floor needs stronger opening, faster stock removal, or scratch control during the metal grinding stage.

For more Rhino-compatible tooling, check Rhino grinder tools or browse metal bond grinding tools.

Best For

• Concrete floor grinding
• Surface opening and leveling
• High-spot removal
• Scratch removal after aggressive prep work
• Rhino grinder metal bond grinding workflows

Features

• Single-segment metal bond grinding shoe
• Aggressive contact for faster concrete cutting
• Suitable for surface preparation before polishing
• Available grit and bond options for different floor conditions
• Used before hybrid transition or resin polishing stages

Available Grits

6 / 16 / 30 / 60 / 120

Use lower grits for stronger cutting, slab opening, and heavier scratch removal. Use higher grits when the floor needs better scratch control before moving into transition or polishing.

Available Bond Types

Soft Bond – for hard concrete
Medium Bond – for general concrete
Hard Bond – for soft or abrasive concrete

If the concrete hardness is unclear, test a small area first or send the jobsite details before ordering.

Fitment Note

This product is listed for Rhino floor grinder use, but fitment should be confirmed before ordering.

Before ordering, confirm:

• Rhino grinder model
• Tool plate or shoe mounting pattern
• Current shoe photo, front and back
• Required grit and bond
• Quantity needed for the full machine set
• Current floor condition and target result

If the mounting pattern is unclear, check adapters and plates or send machine and plate photos through Contact Us.

Polishing Workflow

If the floor still has epoxy, glue, paint, mastic, or coating residue, start with PCD coating removal tools before using metal bond grinding tools.

After metal grinding, use hybrid pads if visible metal scratches need refinement before final polishing.

For the final polishing stage, continue with resin polishing pads after the scratch pattern is controlled.

Shipping

Order processing and delivery time depend on stock status, order quantity, destination country, and shipping method. If you have a deadline, send the required delivery date before ordering.

FAQ

Q1: What is this Rhino metal grinding shoe mainly used for?
It is mainly used for concrete floor grinding, surface preparation, leveling, and scratch removal before later polishing steps.

Q2: Which grit should I choose?
Choose 6 or 16 grit for aggressive opening and heavier removal. Choose 30 or 60 grit for general grinding and scratch control. Choose 120 grit when the floor needs finer scratch refinement before transition or polishing.

Q3: Which bond should I choose?
Choose Soft Bond for hard concrete, Medium Bond for general concrete, and Hard Bond for soft or abrasive concrete.

Q4: Is this tool for coating removal?
No. If the floor still has coating residue, use PCD coating removal tools first.

Q5: What should I use after this tool?
After metal grinding, use hybrid pads to refine scratches, then continue with resin polishing pads for polishing.

Q6: What should I send before ordering?
Send your Rhino grinder model, tool plate photo, current shoe photo, required grit, bond preference, current floor condition, target finish, and quantity.