Overview

This PCD coating removal tool is designed for selected WerkMaster grinder systems used in concrete coating removal and floor preparation. The 1/4 PCD x2 configuration is intended for removing or reducing epoxy, glue, paint, mastic, adhesive residue, and similar surface coatings before normal concrete grinding.

PCD tooling should be used during the removal stage, not as a regular grinding or polishing tool. After coating removal, inspect the concrete surface and choose the next step according to remaining residue, scratch depth, and target finish.

For broader removal options, browse PCD coating removal tools. For WerkMaster-compatible machine selection, check WerkMaster grinder tools.

Best For

• Epoxy coating removal
• Glue and adhesive residue removal
• Paint and mastic removal
• Concrete floor preparation before grinding
• WerkMaster-compatible coating-removal workflows
• Commercial and industrial floor renovation

Features

• PCD coating-removal design
• 1/4 PCD x2 configuration
• Designed for selected WerkMaster grinder systems
• Used before metal bond grinding stages
• Suitable for coating removal and surface preparation
• Helps reduce coating residue before scratch refinement

Fitment Note

This tool is intended for selected WerkMaster grinder systems. Do not assume compatibility by machine brand alone.

Before ordering, confirm:

• WerkMaster machine model
• Tooling plate or holder type
• Mounting interface
• Tool rotation direction if required
• Coating type and thickness
• Required quantity for one machine set

If you are unsure about fitment, check Shop by Machine, browse WerkMaster grinder tools, or send machine and plate photos through Contact Us.

How to Use

Use this tool during the coating-removal stage before regular concrete grinding. Start with a controlled pass and check whether the coating is being removed without unnecessary concrete damage.

Do not use this tool as a finishing or polishing tool. After coating removal, vacuum and inspect the surface. If residue remains, continue removal carefully. If the coating is removed and the floor is ready for grinding, switch to metal bond grinding tools.

If visible metal scratches remain before polishing, use hybrid pads before final polishing with resin polishing pads.

Application Scenarios

• Epoxy floor coating removal
• Glue and adhesive cleanup after flooring removal
• Paint and mastic removal from concrete
• Surface preparation before grinding or polishing
• Commercial floor renovation and prep work

FAQ

What is this WerkMaster PCD tool mainly used for?
It is mainly used for removing epoxy, glue, paint, mastic, adhesive residue, and similar coatings from concrete floors before grinding.

Is it a grinding tool or a coating-removal tool?
It is a coating-removal tool. For regular concrete grinding after removal, use metal bond grinding tools.

Can it remove thick coatings?
Performance depends on coating type, thickness, hardness, machine weight, rotation direction, and tool setup. Send jobsite details before ordering if the coating is heavy or unknown.

Does it fit every WerkMaster grinder?
No. Fitment depends on the machine model, plate system, mounting interface, and tool direction requirements.

What should I use after this tool?
After coating removal, use metal bond grinding tools for concrete grinding and scratch control. Then use hybrid pads and resin polishing pads if the job continues into polishing.

What should I send before ordering?
Send your WerkMaster machine model, plate photo, coating type, coating thickness if known, job area, required quantity, and target next step.