HTC EZ Change 2T + 1/4 PCD Coating Removal Tool

Old epoxy, glue, mastic, paint and similar coatings can slow down floor prep and overload standard grinding shoes. When the job is coating removal, a normal metal bond tool is often inefficient and may waste time on site.

This HTC EZ Change 2T + 1/4 PCD coating removal tool is designed for contractors who need a more efficient and more controlled way to strip coatings from concrete floors. Public tooling pages consistently position quarter-round PCD tools for epoxy, glue, mastic, paint and coating removal applications. Designs with support or stabilizer segments are also described as more controlled than fully open aggressive PCD structures.

This tool is especially suitable for jobsite scenarios such as:
• Removing old epoxy before applying a new coating system
• Stripping glue or mastic residue before grinding or polishing
• Removing paint and similar coatings from concrete floors
• Surface preparation before metal grinding stages
• Floor renovation jobs where coating removal is needed before re-coating, overlays or polishing

Based on public descriptions, quarter-round PCD tools with support segments are a practical choice when the goal is to remove the coating efficiently while keeping the cut more controlled and reducing unnecessary damage to the slab.  

If you are working on epoxy floor renovation, glue cleanup, mastic stripping or general coating removal on an HTC EZ Change grinder, this tool is a practical option for the coating-removal stage before moving into metal grinding or polishing. Contact us with your coating type, floor condition and machine setup, and we can help confirm whether this is the right removal tool for your job.

Features
• HTC EZ Change compatible
• 2T + 1/4 PCD coating removal design
• Suitable for epoxy, glue, mastic, paint and similar coatings
• Designed for concrete floor surface preparation
• Support segment helps provide more controlled removal
• Better suited for removal and prep work than standard grinding-only tools

FAQ

Q1: What is this tool mainly used for?
It is mainly used for removing epoxy, glue, mastic, paint and similar coatings from concrete floors before the next grinding or coating step. Public PCD tooling pages consistently classify these tools as coating-removal tools rather than standard grinding shoes.

Q2: Is it for normal concrete grinding?
Not as the main tool. PCD tools are primarily used for coating removal and floor prep. After the coating is removed, contractors usually switch to a metal bond grinding step to clean the slab and refine the scratch pattern. Public removal-tool pages describe this same workflow.

Q3: Is it better for thin coatings or thick coatings?
More cautiously, this style is best positioned for thin to medium coating removal and controlled floor prep. Public pages show that 2 quarter-round PCD tools can be used for epoxy, glue, paint and adhesives, while more aggressive open PCD designs are often positioned for thicker or tougher coatings.

Q4: What kind of jobsites is it good for?
It is suitable for epoxy floor renovation, glue residue cleanup, mastic removal, paint removal, and concrete slab preparation before re-coating, overlays, or polishing. Those are the most common use cases shown on public PCD product pages.

Q5: Why is there a support segment?
Public tooling pages explain that the support or sacrificial segment acts as a stabilizer or depth guide, helping reduce gouging caused by aggressive PCD segments and making coating removal more controlled